Profile (CV) of the research teaching staff

Journal articles

• Gallardo, Daniel; Díaz, Lucía-Candela; Albajez, José Antonio; Yagüe-Fabra, José A. Metal-Polymer Assembly Dimensional Evaluation by X-Ray Computed Tomography: An Experimental Approach Through Relative Intensity Intercomparison. JOURNAL OF NONDESTRUCTIVE EVALUATION. 2025. DOI: 10.1007/s10921-025-01234-5
  
  
• Gallardo, Daniel; Díaz, Lucía-Candela; Albajez, José Antonio; Yagüe-Fabra, José Antonio. Progress toward the Definition of X-ray Computed Tomography Accuracy in the Characterization of Polymer-Based Lattice Structures. POLYMERS. 2024. DOI: 10.3390/polym16101419
  
  
• Gallardo, Daniel; Díaz, Lucía-Candela; Zanini, Filippo; Albajez, José Antonio; Carmignato, Simone; Yagüe-Fabra, José A. On the effect of material density in dimensional evaluations by X-ray computed tomography of metal-polymer multi-material parts. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY. 2024. DOI: 10.1016/j.cirpj.2024.08.003
  
  
• Gallardo, Daniel; Díaz, Lucía-Candela; Jiménez, Roberto; Torralba, Marta; Albajez, José Antonio; Yagüe Fabra, José Antonio. X-ray computed tomography performance in metrological evaluation and characterisation of polymeric additive manufactured surfaces. ADDITIVE MANUFACTURING. 2023. DOI: 10.1016/j.addma.2023.103754
  
  
• Gallardo, Daniel; Concha, Mercedes; Díaz, Lucía-Candela; Jiménez, Roberto; Torralba, Marta; Albajez, José Antonio; Yagüe-Fabra, José Antonio. Surface characterisation and comparison of polymeric additive manufacturing features for an XCT test object. KEY ENGINEERING MATERIALS. 2023. DOI: 10.4028/p-tN0Lzd
  
  
• Albajez, J.A.; Nuño, S.; Díaz, L.C.; Gallardo, D.; Yagüe, J.A.; Jiménez, R.; Torralba, M. Reference standard for the uncertainty estimation of X–ray Computed Tomography measurements of complex macro-and micro-geometries. IOP CONFERENCE SERIES. MATERIALS SCIENCE AND ENGINEERING. 2021. DOI: 10.1088/1757-899X/1193/1/012065
  
  

Projects

• Impresora Bambulab H2D AMS Combo, para la producción de piezas multimaterial con filamentos de diferentes polímeros. 26/11/25 - 31/12/25
  
  
• T56_23R: GIFMA. Grupo de ingeniería de fabricación y metrología avanzada. 01/01/23 - 31/12/25
  
  

Supervision of undergraduate dissertations

• Evaluación micro geométrica de piezas poliméricas en tomografía computarizada de rayos X multimaterial. Universidad de Zaragoza. Aprobado. 14/09/23
  
  
• Diseño de un patrón de esferas polimérico para la verificación de medidas realizadas mediante tomografía computarizada. Universidad de Zaragoza. Sobresaliente. 04/10/22
  
  
• Diseño de patrones para el estudio de la calidad superficial obtenida en diferentes procesos de fabricación aditiva. Universidad de Zaragoza. Sobresaliente. 06/07/22
  
  

Supervision of master's theses

• Análisis de la influencia de las propiedades de atenuación de los materiales en la configuración de los parámetros de medición por tomografía de rayos X. Universidad de Zaragoza. Notable. 25/09/25
  
  
• Metrología de estructuras en celosía fabricadas en polímero mediante sinterización selectiva con láser. Universidad de Zaragoza. Notable. 12/07/24
  
  
• Análisis del proceso de identificación de porosidades mediante tomografía computarizada. Universidad de Zaragoza. Matrícula de honor. 11/07/24
  
  

Participation in conferences

• XI Manufacturing Engineering Society International Conference (MESIC 2025). Participativo - Ponencia oral (comunicación oral). Analysis of the post-processing influence in X-Ray computed tomography porosity measurements. Bilbao. 25/06/25
  
  
• XI Manufacturing Engineering Society International Conference (MESIC 2025). Participativo - Póster. Methodology for dimensional evaluation of strut-based lattices manufactured by polymeric selective laser sintering. Bilbao. 25/06/25
  
  
• XI Manufacturing Engineering Society International Conference (MESIC 2025). Participativo - Póster. Porosity distribution analysis on foam additively manufactured parts by X-ray computed tomography. Bilbao. 25/06/25
  
  
• Euspen 25th International Conference & Exhibition. Participativo - Póster. Non-destructive analysis of the porosity identification process using computed tomography. Zaragoza. 18/06/25
  
  
• Euspen 25th International Conference & Exhibition. Participativo - Póster. Accuracy estimation in the characterization of surface roughness of polymer-based lattice structures by X-ray computed tomography. Zaragoza. 18/06/25
  
  
• The 20th International Conference on Precision Engineering (ICPE2024). Participativo - Ponencia invitada/ Keynote. Influence of relative intensity in metal-polymer assembly evaluation by X-ray computed tomography. Sendai. 23/10/24
  
  
• euspen 24th International Conference & Exhibition. Participativo - Póster. Simulation-based approach on relative intensity effect in multi material X-Ray computed tomography evaluation. Dublin. 10/06/24
  
  
• 10th Manufacturing Engineering Society International Conference (MESIC 2023). Participativo - Ponencia oral (comunicación oral). Surface Characterisation and Comparison of Polymeric Additive Manufacturing Features for an XCT Test Object. Sevilla. 28/06/23
  
  
• euspen's 23rd International Conference & Exhibition. Participativo - Póster. Case study of X-ray Computed Tomography performance in polymeric AM features evaluation. Copenhagen. 12/06/23
  
  
• 7º Congreso Español de Metrología. Participativo - Ponencia oral (comunicación oral). Evaluación de macro y micro geometrías en patrones de fabricación aditiva mediante tomografía computarizada. Ávila. 27/09/22
  
  
• 9th International Conference of the Manufacturing Engineering Society, MESIC2021. Participativo - Ponencia oral (comunicación oral). Reference standard for the uncertainty estimation of Xray Computed Tomography measurements of complex macro- and micro-geometries. Gijón. 23/06/20
  
  

UNIZAR teaching activity

• Manufacturing processes. Bachelor's Degree in Industrial Design and Product Development Engineering. During academic year 2025-26
  
  
• Manufacturing technology. Bachelor Degree in Mechanical Engineering. During academic year 2025-26
  
  
• Manufacturing technology. Bachelor Degree in Chemical Engineering. During academic year 2025-26
  
  
• Manufacturing processes and industrial drawing. Bachelor's Degree in Industrial Engineering Technology. During academic year 2024-25
  
  
• Manufacturing technology. Bachelor's Degree in Electronic and Automatic Engineering. During academic year 2024-25
  
  
• Manufacturing technology II. Bachelor's Degree in Mechanical Engineering. During academic year 2024-25
  
  
• Manufacturing technology. Bachelor's Degree in Industrial Engineering Technology. From the 2022-23 course to the 2024-25 course
  
  
• Precision engineering and additive manufacturing. Master's in Industrial Engineering. During academic year 2023-24
  
  
• Design and testing of machines and integrated manufacturing systems. Master's in Industrial Engineering. From the 2022-23 course to the 2023-24 course
  
  
• Manufacturing technology. Bachelor's Degree in Chemical Engineering. From the 2022-23 course to the 2023-24 course